Author Topic: KSC constructing a "Launch Pad in a Box" at Pad 39B  (Read 16478 times)

Offline Chris Bergin

Found this in L2 documentation, so wrote it up as it's pretty interesting. Not sure where to host the thread, but the commercial opportunities makes me think it can go here.

http://www.nasaspaceflight.com/2015/05/ksc-construction-launch-pad-box/
Support NSF via L2 -- Help improve NSF -- Site Rules/Feedback/Updates
**Not a L2 member? Whitelist this forum in your adblocker to support the site and ensure full functionality.**

Offline edkyle99

  • Expert
  • Senior Member
  • *****
  • Posts: 15502
    • Space Launch Report
  • Liked: 8788
  • Likes Given: 1386
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #1 on: 05/09/2015 04:24 pm »
Found this in L2 documentation, so wrote it up as it's pretty interesting. Not sure where to host the thread, but the commercial opportunities makes me think it can go here.

http://www.nasaspaceflight.com/2015/05/ksc-construction-launch-pad-box/

This is a head scratcher.  I wonder if it might have begun construction to support SWORDS, since cancelled.

 - Ed Kyle

Offline RonM

  • Senior Member
  • *****
  • Posts: 3340
  • Atlanta, Georgia USA
  • Liked: 2233
  • Likes Given: 1584
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #2 on: 05/09/2015 04:56 pm »
Could this be something that Venture Class Launch Services could use?

http://forum.nasaspaceflight.com/index.php?topic=37525.0

What rockets are currently available that could use "the launch pad in a box"?

Offline arachnitect

  • Member
  • Full Member
  • ****
  • Posts: 1553
  • Liked: 501
  • Likes Given: 759
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #3 on: 05/09/2015 05:04 pm »
Found this in L2 documentation, so wrote it up as it's pretty interesting. Not sure where to host the thread, but the commercial opportunities makes me think it can go here.

http://www.nasaspaceflight.com/2015/05/ksc-construction-launch-pad-box/

This is a head scratcher.  I wonder if it might have begun construction to support SWORDS, since cancelled.

 - Ed Kyle

Probably a good guess.

I wonder what this was funded out of? KSC transition money or some outside source?

Online TrevorMonty

I think they are targeting LVs like Rocket lab Electron and Firefly's Alpha. Both these companies are chasing NASA and DOD business.

Offline Prober

  • Senior Member
  • *****
  • Posts: 10348
  • Save the spin....I'm keeping you honest!
  • Nevada
  • Liked: 722
  • Likes Given: 729
I think they are targeting LVs like Rocket lab Electron and Firefly's Alpha. Both these companies are chasing NASA and DOD business.

don't forget Blue; they have a ready to go launcher.
2017 - Everything Old is New Again.
"I fear all we have done is to awaken a sleeping giant..." --Isoroku Yamamoto

Offline QuantumG

  • Senior Member
  • *****
  • Posts: 9266
  • Australia
  • Liked: 4489
  • Likes Given: 1126
don't forget Blue; they have a ready to go launcher.

Well, pieces of one.
Human spaceflight is basically just LARPing now.

Offline A_M_Swallow

  • Elite Veteran
  • Senior Member
  • *****
  • Posts: 8906
  • South coast of England
  • Liked: 500
  • Likes Given: 223
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #7 on: 05/10/2015 05:35 am »
The Launch Pad in a box can "... support small class (thrust<200k lbs) launch systems" and has "a Universal Propellant Servicing System (UPSS) with LOX and LCH4 pressure fed propellant transfer systems, up to three stage vehicle servicing".

So small launch vehicles or possibly flight testing of lunar landers.

Offline sdsds

  • Senior Member
  • *****
  • Posts: 7253
  • “With peace and hope for all mankind.”
  • Seattle
  • Liked: 2078
  • Likes Given: 2005
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #8 on: 05/10/2015 06:08 am »
I think the N2O4 facility at pad B is centered in the first image below. (Is that correct?) The second shows it zoomed-in as far as Google maps will go. Not much to see there in these images, though.
— 𝐬𝐝𝐒𝐝𝐬 —

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 37813
  • Cape Canaveral Spaceport
  • Liked: 22032
  • Likes Given: 430
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #9 on: 05/10/2015 11:33 am »
possibly flight testing of lunar landers.

No, it is not for that.  It is for launchers

Offline AncientU

  • Senior Member
  • *****
  • Posts: 6257
  • Liked: 4164
  • Likes Given: 6078
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #10 on: 05/10/2015 01:18 pm »
Interesting that methlox has become the default propellant.
Private sector may be taking over (or has taken over) the technology development leadership role in rocket propulsion.
"If we shared everything [we are working on] people would think we are insane!"
-- SpaceX friend of mlindner

Online sanman

  • Senior Member
  • *****
  • Posts: 6086
  • Liked: 1365
  • Likes Given: 8
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #11 on: 05/10/2015 02:24 pm »
I wonder if Launchpad-in-a-box includes a lightning tower? They're not the most portable things.

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 37813
  • Cape Canaveral Spaceport
  • Liked: 22032
  • Likes Given: 430
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #12 on: 05/10/2015 02:28 pm »
Interesting that methlox has become the default propellant.
Private sector may be taking over (or has taken over) the technology development leadership role in rocket propulsion.

No, this was leftovers from a gov't program.

Offline A_M_Swallow

  • Elite Veteran
  • Senior Member
  • *****
  • Posts: 8906
  • South coast of England
  • Liked: 500
  • Likes Given: 223
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #13 on: 05/10/2015 09:53 pm »
Army surplus - where equipment built for a military purpose is (sold to be) used for civilian purposes.

The proposed Masten XEUS (manned) lunar lander is based on a modified Centaur upper stage. Centaur can use two RL10s for its main engines. 2 * 24,729 lbf of thrust. That much force and exhaust needs a launch pad rather than a runway.

https://en.wikipedia.org/wiki/RL10
https://en.wikipedia.org/wiki/Masten_Space_Systems#XEUS


Online DaveS

  • Shuttle program observer
  • Senior Member
  • *****
  • Posts: 8548
  • Sweden
  • Liked: 1240
  • Likes Given: 65
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #14 on: 05/10/2015 10:13 pm »
Army surplus - where equipment built for a military purpose is (sold to be) used for civilian purposes.

The proposed Masten XEUS (manned) lunar lander is based on a modified Centaur upper stage. Centaur can use two RL10s for its main engines. 2 * 24,729 lbf of thrust. That much force and exhaust needs a launch pad rather than a runway.
If you're thinking of Morpheus then it did use a dedicated launch pad, not the SLF runway.
"For Sardines, space is no problem!"
-1996 Astronaut class slogan

"We're rolling in the wrong direction but for the right reasons"
-USA engineer about the rollback of Discovery prior to the STS-114 Return To Flight mission

Offline MattMason

  • Full Member
  • ****
  • Posts: 1078
  • Space Enthusiast
  • Indiana
  • Liked: 788
  • Likes Given: 2093
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #15 on: 05/10/2015 11:37 pm »
Is this idea related or connected to Florida Today's report on NASA soliciting interest in private development/expansion of other launch sites including the unbuilt LC39C?

http://www.floridatoday.com/story/tech/science/space/2015/05/08/ksc-seek-industry-interest-new-launch-pads/26993595/
"Why is the logo on the side of a rocket so important?"
"So you can find the pieces." -Jim, the Steely Eyed

Offline A_M_Swallow

  • Elite Veteran
  • Senior Member
  • *****
  • Posts: 8906
  • South coast of England
  • Liked: 500
  • Likes Given: 223
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #16 on: 05/11/2015 01:39 am »
Army surplus - where equipment built for a military purpose is (sold to be) used for civilian purposes.

The proposed Masten XEUS (manned) lunar lander is based on a modified Centaur upper stage. Centaur can use two RL10s for its main engines. 2 * 24,729 lbf of thrust. That much force and exhaust needs a launch pad rather than a runway.
If you're thinking of Morpheus then it did use a dedicated launch pad, not the SLF runway.

Initially Morpheus just used an area of concrete. After the crash a launch pad was built for the final vehicle.

Offline guckyfan

  • Senior Member
  • *****
  • Posts: 7442
  • Germany
  • Liked: 2336
  • Likes Given: 2900
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #17 on: 05/11/2015 07:42 am »
I love the idea of NASA building something on LC 39-C. It can sit idle for some time then SpaceX can rent the area for 20 years. It should be much easier then to get permission to build a BFR pac there than it would be in a swamp area.

Offline kraisee

  • Expert
  • Senior Member
  • *****
  • Posts: 10561
  • Liked: 811
  • Likes Given: 40
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #18 on: 05/11/2015 02:45 pm »
Seems like a whole lot of make-work to me, with no obvious target beneficiary.

Either that, or a political tool to deliberately channel money away from something else.   Not sure if SLS/Orion or Commercial is the intended target, but wouldn't be surprised either way.   70/30 is my bet.

Ross.
« Last Edit: 05/11/2015 02:47 pm by kraisee »
"The meek shall inherit the Earth -- the rest of us will go to the stars"
-Robert A. Heinlein

Offline A_M_Swallow

  • Elite Veteran
  • Senior Member
  • *****
  • Posts: 8906
  • South coast of England
  • Liked: 500
  • Likes Given: 223
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #19 on: 05/24/2015 01:30 pm »
The Masten XEUS forms part of NASA's Lunar CATALYST Initiative. This will need flight testing. Equipment built for one purpose can be redeployed or copied for a second purpose.

This is the Space Act Agreement between NASA and Masten Space Systems, Inc.
www.nasa.gov/sites/default/files/files/Lunar_Catalyst_SAA_Masten_Signed_30Sep2014.pdf

I hope the lander passed Milestone 4 'Preliminary Design Review (PDR) for robotic lander propulsion and Reaction Control System (RCS).

Offline Chris Bergin

Support NSF via L2 -- Help improve NSF -- Site Rules/Feedback/Updates
**Not a L2 member? Whitelist this forum in your adblocker to support the site and ensure full functionality.**

Offline Orbiter

  • Senior Member
  • *****
  • Posts: 3001
  • Florida
  • Liked: 1556
  • Likes Given: 1390
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #21 on: 06/02/2015 03:06 pm »
I wasn't expecting them to name it LC-39C.
KSC Engineer, astronomer, rocket photographer.

Offline RonM

  • Senior Member
  • *****
  • Posts: 3340
  • Atlanta, Georgia USA
  • Liked: 2233
  • Likes Given: 1584
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #22 on: 06/02/2015 03:23 pm »
I wasn't expecting them to name it LC-39C.

Why not? In the 1963 plans, LC-39A was originally going to be LC-39C, but since NASA only built two pads they called it A. Now there is finally going to be a third pad at LC-39 it makes sense to call it C.

http://en.wikipedia.org/wiki/Kennedy_Space_Center_Launch_Complex_39#Initial_design

Offline jacqmans

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 21807
  • Houten, The Netherlands
  • Liked: 8701
  • Likes Given: 321
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #23 on: 06/04/2015 09:49 am »
Jacques :-)

Offline jacqmans

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 21807
  • Houten, The Netherlands
  • Liked: 8701
  • Likes Given: 321
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #24 on: 06/13/2015 12:37 pm »
Jacques :-)

Offline AncientU

  • Senior Member
  • *****
  • Posts: 6257
  • Liked: 4164
  • Likes Given: 6078
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #25 on: 06/13/2015 12:50 pm »


Looks like a newly-reclaimed piece of land at LC-39B.  If so, there should be an EIS for it that could provide additional facts/plans.
"If we shared everything [we are working on] people would think we are insane!"
-- SpaceX friend of mlindner

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 37813
  • Cape Canaveral Spaceport
  • Liked: 22032
  • Likes Given: 430
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #26 on: 06/14/2015 01:02 am »
Not really.  It is within LC-39B boundaries.  No need for EIS.

Offline jacqmans

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 21807
  • Houten, The Netherlands
  • Liked: 8701
  • Likes Given: 321
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #27 on: 07/14/2015 03:51 pm »
July 14, 2015
MEDIA ADVISORY M21-15

Media Invited to View New Small Class Vehicle Launch Pad 39C

Media are invited to attend an event for the new Small Class Vehicle Launch Pad 39C at 8:30 a.m. EDT on Friday, July 17.

NASA's Kennedy Space Center in Florida took another step forward in its transformation into a 21st Century multi-user spaceport with the creation of a new launch pad that is designed to attract smaller aerospace companies and enable them to develop and launch their vehicles from the center.

The ceremony will be hosted by Kennedy Director Bob Cabana and representatives from the Ground Systems Development and Operations Program and Kennedy’s Center Planning and Development and Engineering Directorates.

International media accreditation for this event is closed. U.S. media without permanent credentials must apply for accreditation by noon on Thursday, July 16.  Two forms of government-issued identification are required to receive a badge. One must be with a photograph such as a driver’s license or passport. Badges will be available for pickup at the Kennedy Badging Office, located on State Road 405 east of the Kennedy Space Center Visitor Complex. Hours for the Kennedy Badging Office are 6 a.m. to 3 p.m. Questions about accreditation may be addressed to Jennifer Horner at 321-867-6598 or [email protected].

Media must apply for credentials online at:

https://media.ksc.nasa.gov

Media should arrive at the Press Site at 7:30 a.m. to be escorted to the ceremony at 8 a.m. Following the event, the media will be escorted back to the Press Site by 10 a.m.

For more information about NASA’s Kennedy Space Center, visit:

http://www.nasa.gov/kennedy
Jacques :-)

Online catdlr

  • Member
  • Senior Member
  • *****
  • Posts: 12417
  • Enthusiast since the Redstones
  • Marina del Rey, California, USA
  • Liked: 10138
  • Likes Given: 8481
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #28 on: 07/17/2015 08:30 pm »
New Launch Pad will Enable Smaller Rocket Launches at Kennedy Space Center

Published on Jul 17, 2015
NASA marked the completion of the new Small Class Vehicle Launch Pad, designated Pad 39C, with a ribbon cutting ceremony on July 17 at Kennedy Space Center in Florida.

It's Tony De La Rosa, ...I don't create this stuff, I just report it.

Online catdlr

  • Member
  • Senior Member
  • *****
  • Posts: 12417
  • Enthusiast since the Redstones
  • Marina del Rey, California, USA
  • Liked: 10138
  • Likes Given: 8481
Re: KSC constructing a "Launch Pad in a Box" at Pad 39B
« Reply #29 on: 08/04/2015 08:24 pm »
Launch Pad 39C Ready for Small Class Rockets at Kennedy Space Center

Published on Aug 4, 2015
Kennedy Space Center's new Launch Pad 39C will provide access for small class vehicle rocket launches. Computer-aided imagery illustrates how a company's rocket could be integrated with its launch platform inside the Vehicle Assembly Building or at the pad before testing and launch. For more information on Kennedy partnerships, visit http://kscpartnerships.ksc.nasa.gov/.

It's Tony De La Rosa, ...I don't create this stuff, I just report it.

Tags:
 

Advertisement NovaTech
Advertisement Northrop Grumman
Advertisement
Advertisement Margaritaville Beach Resort South Padre Island
Advertisement Brady Kenniston
Advertisement NextSpaceflight
Advertisement Nathan Barker Photography
1