-
#100
by
Ronsmytheiii
on 03 Aug, 2011 17:20
-
Would it have been possible to deploy the radioskaf from the JEM airlock
...I realize there is nothing currently to grapple on to with the Japanese RMS, but would it have been small enough to fit into the JEM airlock any ways ??...this is supposed to be the first of several of these satellites...maybe future ones can be deployed in this manner instead of an EVA 
Too much structure that the pico sat could collide with in this attitude, also lack of a grappling mechanism.
-
#101
by
Ronsmytheiii
on 03 Aug, 2011 17:22
-
Ground letting crew know that they started late, but have good working tempo.
-
#102
by
Ronsmytheiii
on 03 Aug, 2011 17:32
-
crew now going to examine the troublesome Antenna
Edit: actually dont know which Antenna they are working on...
-
#103
by
Ronsmytheiii
on 03 Aug, 2011 17:39
-
not going to mess with the first antenna, but will still take photos of the second
-
#104
by
Ronsmytheiii
on 03 Aug, 2011 17:40
-
ku returns!
Per PAO, going to skip KU band antenna removal for now due to timeline, still working laser communications device install
-
#105
by
Ronsmytheiii
on 03 Aug, 2011 17:43
-
setting up to take images of the degraded antenna
-
#106
by
Ronsmytheiii
on 03 Aug, 2011 17:45
-
-
#107
by
Ronsmytheiii
on 03 Aug, 2011 17:47
-
MCC-M letting crew know what not to grab
-
#108
by
Ronsmytheiii
on 03 Aug, 2011 17:48
-
Sergei has taken pictures, will swap cameras and wratchet wrenches
-
#109
by
Ronsmytheiii
on 03 Aug, 2011 17:49
-
ok, why does the ISS feed always switch to the side that does not show the crew?
-
#110
by
Ronsmytheiii
on 03 Aug, 2011 17:52
-
having issues translating, trying to figure out how to proceed, reel was about a meter short
-
#111
by
Ronsmytheiii
on 03 Aug, 2011 17:54
-
ground asking crew to stop to try to figure out how to help
-
#112
by
Ronsmytheiii
on 03 Aug, 2011 17:59
-
going to remove cable holder to add length
-
#113
by
Ronsmytheiii
on 03 Aug, 2011 18:01
-
anyone want to take over?
-
#114
by
Ronsmytheiii
on 03 Aug, 2011 18:04
-
-
#115
by
Chris Bergin
on 03 Aug, 2011 18:06
-
anyone want to take over?
Here
-
#116
by
Ronsmytheiii
on 03 Aug, 2011 18:08
-
working connector cap, what camera is the second picture?
-
#117
by
MikeMi.
on 03 Aug, 2011 18:09
-
Are they still working wires of laser communications system?
-
#118
by
Chris Bergin
on 03 Aug, 2011 18:09
-
And that connector is done.
-
#119
by
Chris Bergin
on 03 Aug, 2011 18:10
-