-
#220
by
Ronsmytheiii
on 19 May, 2010 15:51
-
turning bolt H2 for 16-17 turns
H1 for 5-6 tirnes
-
#221
by
Ronsmytheiii
on 19 May, 2010 15:53
-
Steve is putting thepaddle on battery 5 where they will stay overnight
-
#222
by
Ronsmytheiii
on 19 May, 2010 15:54
-
Starting cleanup activities to head back to the airlock, going to move APFR for Garrett Reisman on EVA-3, Moving gap spanner away from Battery 5
-
#223
by
Ronsmytheiii
on 19 May, 2010 15:57
-
Mike doing APFR move, Steve taking inventory, then going to work temp store.
TDRS handover
APFR in place
-
#224
by
Ronsmytheiii
on 19 May, 2010 16:03
-
-
#225
by
Ronsmytheiii
on 19 May, 2010 16:04
-
Mike good is going to reposition the temp stowed battery for overnight configuration
-
#226
by
Ronsmytheiii
on 19 May, 2010 16:08
-
one get ahead might be to go back to the SGANT antenna, to retorque bolt and wiggle tests
-
#227
by
Ronsmytheiii
on 19 May, 2010 16:11
-
REt on truss bag needs to go in it, Mike is doing an inventory through the window
-
#228
by
Ronsmytheiii
on 19 May, 2010 16:12
-
MCC likes inventory, battery position
-
#229
by
psloss
on 19 May, 2010 16:17
-
LOL -- IV and ground force EV crew to "beg" for more work outside.
They were talking about doing a photo survey of the starboard side of the orbiter...if so, those pix would be pretty cool beyond their engineering value.
-
#230
by
Ronsmytheiii
on 19 May, 2010 16:17
-
Steve ready for get aheads,wants to do photo survey of the starboard side, MCC thinks they have to be really ambitious to do it, but Steve wants to do it.
MCC throws out the option of SGANT bolts, Steve on his way to airlock
-
#231
by
Ronsmytheiii
on 19 May, 2010 16:25
-
well seems like they are doing the SGANT antenna, reading do not touch areas to Steve
He is leaving the airlock, does not need O2 recharge
-
#232
by
Ronsmytheiii
on 19 May, 2010 16:28
-
thermal cover is closed, Checking SAFER handles, Steve is headed to Z1 truss
-
#233
by
Fuji
on 19 May, 2010 16:32
-
-
#234
by
Ronsmytheiii
on 19 May, 2010 16:35
-
Mike is back at the airlock, ground wants him to join Steve at Z0, SGANT inhibits are in place
-
#235
by
Ronsmytheiii
on 19 May, 2010 16:41
-
Steve at the SGANT boom, working bolts, 6 minutes to KU
-
#236
by
Ronsmytheiii
on 19 May, 2010 16:44
-
Mike has joined Steve at the SGANT, heat shield has been removed, using right angle drive and PGT to drive bolts
Bravo 2 clockwise 2, dnt think they are going to do the Orbiter survey
-
#237
by
Ronsmytheiii
on 19 May, 2010 16:52
-
-
#238
by
Ronsmytheiii
on 19 May, 2010 16:55
-
Finished final bolt, going to do a wiggle test, no motion, no gaps!
-
#239
by
Ronsmytheiii
on 19 May, 2010 16:56
-
Going to remove gimbal locks, temporary strap
