LIVE: STS-132 Flight Day 3 - RPM, Docking, ICC-VLD Robotic Install, EVA-1 Prep

• #20 by psloss on 16 May, 2010 09:54
• FWIW, the prelim PADs for the NH, NC-4, and Ti burns are in today's execute package (as is normal).
  
  A few deltas to the PAD in the execute package:
  
  Orbiter weight: 246359 lbs
  
  TIG (MET) 00/15:48:01.4
  
  PEG-7 targets: dvx = 100.2 fps (others same as in exec. pkg)
  
  Max TIG slip 2 minutes / do not update TIG
  
• #21 by marshallsplace on 16 May, 2010 10:01

• ---

  
• #22 by Ronsmytheiii on 16 May, 2010 10:06

• ---

  
• #23 by Ronsmytheiii on 16 May, 2010 10:07
• good config for the burn, can see station
• #24 by Ronsmytheiii on 16 May, 2010 10:09
• NC4 burn, good burn no trim required

  ---

  

  
• #25 by Ronsmytheiii on 16 May, 2010 10:15
• #26 by Ronsmytheiii on 16 May, 2010 10:17
• Nav selected imu is 1, ready for item 23
• #27 by kneecaps on 16 May, 2010 10:21
• Right, i've been following along in the background but can now follow in more detail.
  
  Crew should be working block 10A on page 4-10 of the RNDZ C/L. This is the STAR TRACKER NAV setup.
  
  (In fact I'm certain they are given the NAV selected IMU calls and the ITEM 4s).
• #28 by Ronsmytheiii on 16 May, 2010 10:23
• calling up ground solution for NCC, going to burn onboard
• #29 by kneecaps on 16 May, 2010 10:24
• MCC called up ground solution for NCC burn.
  
  DVX -0.3
  DVY +0.2
  DYZ +0.3
  
  DVTOT +0.5
  
  However MCC prefer the onboard solution and want to use that.
  
  Values are filled int othe NCC BURN SOLUTION box on the bottom right of 4-11. CDR will be working the block 11A procedures to target this burn.
• #30 by Ronsmytheiii on 16 May, 2010 10:26
• Calling up propellant for rendezvous

  ---

  
• #31 by kneecaps on 16 May, 2010 10:29
• The values for the RNDZ PRPLT PAD (found on 9-4 of RNDZ C/L) are
  
  Block 1    54
  Block 2    Right
  Block 3   Right
  Block 4    4.99
  Block 5    Left
  Block 6    4.46
  Block 7    NA
  Block 8       NA
  Block 9      54
  Block 10    8
• #32 by Ronsmytheiii on 16 May, 2010 10:29
• View of APAS ring extended:

  ---

  
• #33 by Ronsmytheiii on 16 May, 2010 10:36
• working OCA reconfig
• #34 by Ronsmytheiii on 16 May, 2010 10:38
• go to burn onboard
• #35 by Ronsmytheiii on 16 May, 2010 10:43
• Good config for NCC burn
• #36 by Ronsmytheiii on 16 May, 2010 10:44
• Good burn
• #37 by Ronsmytheiii on 16 May, 2010 10:51
• on the flightdeck

  ---

  

  
• #38 by psloss on 16 May, 2010 10:52
• Heh, crew interviewing CapCom on the launch.  (Chris Cassidy was the ASP on launch day.)
  
  Chris noted the bad weather in the area prevented him from getting back for the Orbit 1 shift yesterday.
  
• #39 by Ronsmytheiii on 16 May, 2010 10:56
• EMU removal is complete

  ---