-
#180
by
racshot65
on 19 Nov, 2009 17:56
-
Where are you getting all these cool PDF's from ?
I cant find them on NASA's site ?
-
#181
by
psloss
on 19 Nov, 2009 17:57
-
-
#182
by
arkaska
on 19 Nov, 2009 17:57
-
Comrade is going through the safety concerns for PAS deployment.
-
#183
by
arkaska
on 19 Nov, 2009 17:59
-
Mike (lower) and Satcher (upper) has arrived at the work site.
They are going to work close to each other during this PAS deployment.
-
#184
by
arkaska
on 19 Nov, 2009 18:02
-
-
#185
by
arkaska
on 19 Nov, 2009 18:05
-
Mike is going to deploy a Clevis Bracket
There is 4 bolts he need to release. 10 turns on the first three and 8 turns on the fourth bolt. Not 10 turns on all as PAO sad.
-
#186
by
arkaska
on 19 Nov, 2009 18:07
-
Where are you getting all these cool PDF's from ?
I cant find them on NASA's site ?
Mostly on L2
-
#187
by
arkaska
on 19 Nov, 2009 18:08
-
No exercise allowed on station.
-
#188
by
arkaska
on 19 Nov, 2009 18:10
-
They are both using their PGT
-
#189
by
arkaska
on 19 Nov, 2009 18:12
-
We can se Satcher through Mikes helmet camera.
They will now start to remove the diagonal brace.
-
#190
by
arkaska
on 19 Nov, 2009 18:16
-
Looking good on consumables.
-
#191
by
arkaska
on 19 Nov, 2009 18:19
-
They are having some problems with a bolt that is harder to remove than planned.
-
#192
by
arkaska
on 19 Nov, 2009 18:23
-
They will try to drive the bolt in with a lower tork setting and then drive it out with a higher tork setting.
-
#193
by
arkaska
on 19 Nov, 2009 18:30
-
They got the bolt out 35 turns but not they are afraid it floated away.
-
#194
by
Retired Downrange
on 19 Nov, 2009 18:30
-
Hammer time?
-
#195
by
arkaska
on 19 Nov, 2009 18:32
-
Hammer time?
They are discussing it. Mike want to use it.
-
#196
by
arkaska
on 19 Nov, 2009 18:34
-
MCC-H: "We are ready for the hammer"
-
#197
by
arkaska
on 19 Nov, 2009 18:36
-
Mike using the plastic end of the hammer.
-
#198
by
arkaska
on 19 Nov, 2009 18:37
-
They hope that the cooling down during an upcoming night pass will help.
-
#199
by
arkaska
on 19 Nov, 2009 18:46
-
They will try using a socket to get direct force on the bolt.