-
#140
by
Maty
on 17 May, 2009 15:29
-
Calming words from Drew, Mass getting flustered that bit won't engaged
-
#141
by
Maty
on 17 May, 2009 15:30
-
Tether broken to handrail
-
#142
by
Maty
on 17 May, 2009 15:31
-
MCC-H reminding there is a spare bit
-
#143
by
Maty
on 17 May, 2009 15:33
-
New tether attached to handrail, Mass egressing the PFR to try and get a better angle on the fastener
-
#144
by
GoForTLI
on 17 May, 2009 15:33
-
Bolt head look OK (whew!).
Update: A better look at it: "It's all galled up."
-
#145
by
Kel
on 17 May, 2009 15:33
-
Bolt head looks OK - still not coming out
-
#146
by
Maty
on 17 May, 2009 15:34
-
Mass describing bolt head as "reasonably ok", yet its still not coming out
-
#147
by
Bubbinski
on 17 May, 2009 15:35
-
Here's a shot of the pistol grip gun. I'm off to breakfast, thank you everyone for the great coverage!
-
#148
by
Maty
on 17 May, 2009 15:37
-
Trying to see bolt head in helmet cam
-
#149
by
Kel
on 17 May, 2009 15:37
-
Discussing getting new bit
-
#150
by
Maty
on 17 May, 2009 15:38
-
MCC-H suggesting refitting another bolt and then attempting this bolt again
-
#151
by
MikeMi.
on 17 May, 2009 15:39
-
Excusse me - all these tools from RIB caddy are exteneded things for PGT? (6 items, cause with 7th Im pretty sure its manual as I see that its similiar with FET)
And I need some clearance with these guide studs for FCP - are they gonna be placed after handrail and clamps will be out?
What is happend with removed fasteners/bits?
-
#152
by
Maty
on 17 May, 2009 15:39
-
-
#153
by
Kel
on 17 May, 2009 15:40
-
Trying to retorque left bottom bolt (right bottom has been the stinker)
-
#154
by
Kel
on 17 May, 2009 15:41
-
Remove lower clamp removal tool to gain more direct access to fasteners
-
#155
by
Maty
on 17 May, 2009 15:42
-
Excusse me - all these tools from RIB caddy are exteneded things for PGT? (6 items, cause with 7th Im pretty sure its manual as I see that its similiar with FET)
And I need some clearance with these guide studs for FCP - are they gonna be placed after handrail and clamps will be out?
What is happend with removed fasteners/bits?
The first 6 tools were installed with the mini power tool, yes the 7th was manual.
Yes the guides (anchors) will be installed once the handrail is removed.
And the removed fasteners are going into a disposal bag
-
#156
by
Kel
on 17 May, 2009 15:43
-
Bolt looking "pretty beat up" and no longer really a hex shape.
-
#157
by
Kel
on 17 May, 2009 15:44
-
MCC-H wants spare bit rather than trying to redrive with this bit
-
#158
by
Maty
on 17 May, 2009 15:44
-
MCC-H requesting to get the new hex bit
-
#159
by
GoForTLI
on 17 May, 2009 15:46
-
How far down are we on the timeline?