-
#280
by
kneecaps
on 16 May, 2009 17:42
-
I'd estimate things are pretty much on-timeline.
-
#281
by
Chris Bergin
on 16 May, 2009 17:42
-
-
#282
by
kneecaps
on 16 May, 2009 17:43
-
Removal of the CEB cover will allow access and removal of the cards within.
-
#283
by
Chris Bergin
on 16 May, 2009 17:43
-
Go for ACS repair (has been powered down).
-
#284
by
Kel
on 16 May, 2009 17:43
-
Crew is go for ACS repair once they gain access
-
#285
by
generic_handle_42
on 16 May, 2009 17:44
-
"I don't think brain surgeons go woo-hoo when they pull something out."
"Well, they should!"
-
#286
by
AnalogMan
on 16 May, 2009 17:45
-
The FCP clamps to the panel they are going to remove, but it leaves space for the 32 (?) screws to back out. The screw heads are accessed through holes that are too small for the screws to pass through.
The sticky pads hold the panel in the middle of the FCP area, whilst mechanical latches grip the outside of the panel.
The combined FCP and panel will come away as one unit with the screws trapped between.
-
#287
by
Chris Bergin
on 16 May, 2009 17:47
-
Mini power tool being used to access the 32 small screws - specially designed for this task.
-
#288
by
Retired Downrange
on 16 May, 2009 17:47
-
"you are clear to remove the remaining 27 fasteners"
...I don't think we will hear a command like that very often!
-
#289
by
kneecaps
on 16 May, 2009 17:47
-
Out comes the Mini Power Tool. The MPT is being used to remove the remaining fasteners (yes, there are 32).
Also there is no need to provide a means for replacing the 32 fasteners as a replacement cover is available. However this replacement cover will not be needed if install of the CEB-R (CEB Replacement) goes well.
-
#290
by
AnalogMan
on 16 May, 2009 17:48
-
And now for one of the neatest tools - the mini power tool
-
#291
by
glanmor05
on 16 May, 2009 17:48
-
"you are clear to remove the remaining 27 fasteners"
...I don't think we will hear a command like that very often!
My wife would say "well maybe if you spent less time on that stupid website"!
-
#292
by
braddock
on 16 May, 2009 17:50
-
suspense - do they have a procedure for stripped screws?
-
#293
by
Retired Downrange
on 16 May, 2009 17:51
-
"I heard that all screw are out"
"That's true... but I am inspecting"
-
#294
by
Chris Bergin
on 16 May, 2009 17:51
-
24, 25, 26, 27, 28
"I feel like a countdown timer, our countup." - John.
All out, but number 22 "didn't look all that great" - "Ok, 22 out."
"To Scooter: This activity is dedicated to the studying of tiny screws in space." - Simpsons homage!
-
#295
by
Kel
on 16 May, 2009 17:51
-
-
#296
by
Kel
on 16 May, 2009 17:53
-
-
#297
by
generic_handle_42
on 16 May, 2009 17:54
-
"To Scooter: This activity is dedicated to the studying of tiny screws in space." - Simpsons homage!
Nice catch! There's quite a bit of banter going on. Helps relieve tension I guess!
-
#298
by
chksix
on 16 May, 2009 17:54
-
Thanks a million for this coverage guys!
-
#299
by
kneecaps
on 16 May, 2009 17:55
-
On page 7-79 of the checklist. Step 12 on the FF EV column.
