-
#140
by
kneecaps
on 16 May, 2009 15:32
-
Drew will guide the COS in until he sees 'B Ready' lights.....once he gets that he will maintain slight downward pressure on the instrument.
John will then move in to start on the B Latch.
-
#141
by
Kel
on 16 May, 2009 15:32
-
John at bottom center
Drew on left with COS moving toward telescope
-
#142
by
Kel
on 16 May, 2009 15:35
-
View from Drew's helmet cam
-
#143
by
Kel
on 16 May, 2009 15:36
-
-
#144
by
Chris Bergin
on 16 May, 2009 15:38
-
-
#145
by
kneecaps
on 16 May, 2009 15:40
-
John deploying the alignment aid arm.
-
#146
by
NavySpaceFan
on 16 May, 2009 15:40
-
COS is in! Now bolting it in place.
-
#147
by
Kel
on 16 May, 2009 15:41
-
COS is in! Now bolting it in place.
-
#148
by
robertross
on 16 May, 2009 15:41
-
-
#149
by
kneecaps
on 16 May, 2009 15:42
-
Bit of vertical motion observed. Reseating on the 'B Latch' plunger and retrying.
-
#150
by
robertross
on 16 May, 2009 15:46
-
having a slight issue at the moment. Only 2.1 turns, but expecting 5 turns.
-
#151
by
robertross
on 16 May, 2009 15:47
-
Going now....11-1/4 turns
-
#152
by
Kel
on 16 May, 2009 15:48
-
B latch complete - now A latch
-
#153
by
robertross
on 16 May, 2009 15:48
-
Good torque.
A seated.
B latch done
Excellent.
-
#154
by
kneecaps
on 16 May, 2009 15:49
-
The thinking was that there shouldn't have been any movement of the COS during the turns. Some motion was observed but after 2 turns which MCC advised was okay.
-
#155
by
Kel
on 16 May, 2009 15:49
-
Expecting 11.5 - 15.5 turns for A latch
-
#156
by
Kel
on 16 May, 2009 15:50
-
A latch 14 turns - lights off.
-
#157
by
robertross
on 16 May, 2009 15:50
-
Torqued out 14 turns.
-
#158
by
robertross
on 16 May, 2009 15:51
-
EVA ratchets for the final 1/2 turns
-
#159
by
Kel
on 16 May, 2009 15:52
-
COS permanently bolted in to HST