-
#80
by
daj24
on 14 May, 2009 13:15
-
FYI -- Herschel and Planck are on their way to L2!
-
#81
by
Ronsmytheiii
on 14 May, 2009 13:16
-
foot restraint already on, moving to ingress position
-
#82
by
Ronsmytheiii
on 14 May, 2009 13:17
-
on the arm, john underneath Hubble
-
#83
by
Ronsmytheiii
on 14 May, 2009 13:19
-
-
#84
by
Ronsmytheiii
on 14 May, 2009 13:20
-
Release and extend mechanism
-
#85
by
Ronsmytheiii
on 14 May, 2009 13:23
-
-
#86
by
Ronsmytheiii
on 14 May, 2009 13:26
-
Imax 3d, working on aft fixture which will temporarily hold Wide field 2:
-
#87
by
Ronsmytheiii
on 14 May, 2009 13:27
-
-
#88
by
Crispy
on 14 May, 2009 13:30
-
FYI -- Herschel and Planck are on their way to L2!
My internet connection is struggling to run both feeds!
-
#89
by
Ronsmytheiii
on 14 May, 2009 13:32
-
Television back in 6 minutes, approaching 40 minutes in
-
#90
by
Ronsmytheiii
on 14 May, 2009 13:33
-
Drew has glove inspection, John has pit pin, gloves look good, pins went in easily
-
#91
by
Chandonn
on 14 May, 2009 13:33
-
CNN corrected itself on the tether issue, but claimed that's what they were "told". Guess my letter to them did some good.
"Drew has glove inspection, John has pit pin, gloves look good, pins went in easily"
I figured glove inspections would be done pretty frequently. Some of the access points on Hubble probably have sharp edges in the current MMOD environment.
-
#92
by
Maty
on 14 May, 2009 13:34
-
Drew ingressed MFR, has collected PGT and rachet and is now performing a glove check.
John installing pip pins now that Hubble has been pivoted to 90 degrees
-
#93
by
Ronsmytheiii
on 14 May, 2009 13:35
-
-
#94
by
Ronsmytheiii
on 14 May, 2009 13:36
-
John putting cover on, Drew getting fine guidance sensor handhold
-
#95
by
Ronsmytheiii
on 14 May, 2009 13:37
-
Drew "Wow, amazing view of the vehicle"
Who turned off the light?
-
#96
by
Ronsmytheiii
on 14 May, 2009 13:39
-
-
#97
by
Maty
on 14 May, 2009 13:40
-
John is preparing to install thermal cover
Drew has arrived at wide field cam, will install handle with 4 zip nuts and remove ground strap
-
#98
by
Ronsmytheiii
on 14 May, 2009 13:41
-
Drew installing fine guidance sensor handhold, wants to break torque
-
#99
by
Ronsmytheiii
on 14 May, 2009 13:41
-
paint is all intact, sort of brown, wants six inches closer to telescope
