NASASpaceFlight.com Forum
NASA Shuttle Specific Sections => Atlantis (Post STS-135, T&R) => Topic started by: Chris Bergin on 01/27/2008 10:13 am
-
Documents on L2 - will have to be a series of articles (opening with the latest processing news) as the amount of info is massive. 17 Overviews, first two in article 1 - doubt I'll get to cover more than five or six given the launch date.
Previous (for the December launch) FRR coverage: http://forum.nasaspaceflight.com/forums/thread-view.asp?tid=10808&posts=14&start=1
Links and larger images of those contained within the articles will go in this thread.
Article 1:
Hale pride as STS-122 heads back into launch preps - FRR review 1 (Windows and EVA)
http://www.nasaspaceflight.com/content/?cid=5341
Images below...
-
-
Great work as always. Still reading through that FRR presentation on L2. Stunning amount of info and a real testiment to the shuttle team.
Liked this,
"Even more recent in NASA's plans are the SARJ Grease Guns, which included the first images of what appears to be items more common to the catering industry. However, these guns will have a much more important purpose than decorating cakes."
:laugh:
-
Great article and that was only two parts of 17 from the FRR? :o
-
STSFan10 - 27/1/2008 4:11 PM
Great article and that was only two parts of 17 from the FRR? :o
Thanks and yep. Will try and do as much as possible in the run up to launch.
-
Great read as always! Really is the best place to follow Shuttle.
-
Thanks for the article, which was great! Really happy to see they are now getting back ready for a launch.
-
As always thank you Chris for the great information and job you do on this message board! :)
-
Very interesting adn informative article. Is this grease gun a bit like the T-Rad, in that it's only real test will be in the space enviorment? So it might not actually work as a solution?
-
Pete at Edwards - 28/1/2008 3:55 AM
Very interesting adn informative article. Is this grease gun a bit like the T-Rad, in that it's only real test will be in the space enviorment? So it might not actually work as a solution?
A good question, but I can't really answer that, other than to say they have not made any references similar to that of testing T-Rad on a DTO.
-
A reference on the 602 EF grease:
http://www.2spi.com/catalog/vac/braycote-602ef-properties.html