Author Topic: ATK Successfully Tests Orion Launch Abort Motor Igniter  (Read 1814 times)

Offline jacqmans

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 21925
  • Houten, The Netherlands
  • Liked: 8873
  • Likes Given: 325
News Release Issued: Sep 30, 2014 (3:49pm EDT)


ATK Successfully Tests Orion Launch Abort Motor Igniter

 
ARLINGTON, Va., Sept. 30, 2014 /PRNewswire/ -- NASA and ATK (NYSE: ATK) successfully completed a static test of the launch abort motor igniter for the Orion crew capsule's Launch Abort System (LAS). Conducted at ATK's facility in Promontory, Utah, this test is the next step toward qualifying the igniter for production.

ATK's launch abort motor igniter for the Orion crew capsule's Launch Abort System is one step closer toward qualifying for production.

The LAS will be placed on top of the Orion spacecraft, the first spacecraft capable of taking humans to multiple destinations in deep space. Orion will launch aboard NASA's Space Launch System (SLS), and its LAS will include an escape rocket on top of the capsule that can carry the crew to safety if any anomalies occur during the launch. SLS and Orion provide an unmatched combination of mass, volume and speed that can deliver humans and cargo to deep space faster, safer and more affordably than any other existing vehicles or proposed options.

"As a former astronaut, I understand how critical the abort motor is to the safety of those flying aboard the Orion spacecraft," said Charlie Precourt, vice president and general manager of ATK's Space Launch division. "ATK is operating at the highest standard to ensure this motor will be ready and reliable, if needed."

For this qualification test, technicians exposed the igniter to vibrations and extreme temperatures to simulate pre-operating and flight conditions before firing it and at its hottest condition. Next year, the igniter will undergo a similar qualification test, but it will be fired at its coldest temperature. Previous tests include a development test that verified igniter performance analytical models prior to a static test of the launch abort motor, and Pad Abort-1, a ground launch test of the entire LAS.

This igniter design enables the abort motor to activate within milliseconds, lifting the crew module to safety with an acceleration over 10gs.

"Our employees have done an outstanding job in advancing the maturity of the launch abort motor by successfully executing several qualification tests this summer, including the manifold ultimate loads test, igniter closure hydro-test and this igniter static fire test," said Precourt. "This is real rocket science, and our employees are committed, intelligent people making our journey to deep space possible."

The next major abort motor milestone will be its Critical Design Review, scheduled for summer 2015.

SLS began welding the rocket's fuel tanks on the Vertical Assembly Center at the Michoud Assembly Center in New Orleans last week, while NASA anticipates a test fire of the RS-25 engine by the end of the year at Stennis Space Center near Bay St. Louis, Mississippi. This year's milestones will conclude with Orion's first test flight, Exploration Flight Test-1 (EFT-1), scheduled for December. Since this test flight is uncrewed, and the abort motor and attitude control motors will not be needed, the only live motor on the LAS will be the jettison motor.

EFT-1 will take Orion farther into space than a spacecraft built for humans has traveled in more than 40 years. The test flight is the next step on our journey to deep space.

A ground static firing of ATK's full-scale SLS booster, Qualification Motor-1 (QM-1), is planned for early 2015 at ATK's facility in Promontory, Utah.

The SLS and Orion programs are supported by a network of hundreds of suppliers from 47 states. ATK has 29 key SLS booster suppliers across 16 states: Alabama, Arizona, California, Connecticut, Indiana, Kentucky, Massachusetts, Minnesota, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Texas, Utah and Wisconsin.

With SLS and Orion, ATK is embarking on a mission to deep space that leverages more than five decades of pushing boundaries. Recent SLS booster milestones include:           
•Critical Design Review (August 7)
•Forward skirt test (May 20)
•Booster avionics test (April 3)
Jacques :-)

Offline Hog

  • Senior Member
  • *****
  • Posts: 2855
  • Woodstock
  • Liked: 1714
  • Likes Given: 6941
Re: ATK Successfully Tests Orion Launch Abort Motor Igniter
« Reply #1 on: 09/30/2014 08:58 pm »
That would be one quick test.

Congrats ATK, just another step towards launching humans aboard a NASA system again.
Paul

Tags:
 

Advertisement NovaTech
Advertisement
Advertisement Margaritaville Beach Resort South Padre Island
Advertisement Brady Kenniston
Advertisement NextSpaceflight
Advertisement Nathan Barker Photography
1