Author Topic: Nozzle tricks?  (Read 9150 times)

Offline Asteroza

  • Senior Member
  • *****
  • Posts: 3027
  • Liked: 1171
  • Likes Given: 33
Nozzle tricks?
« on: 03/17/2014 04:35 am »
Interesting post over at the Secret Projects Forum, outlining early J-2X nozzle extension concepts.

http://www.secretprojects.co.uk/forum/index.php/topic,16981.msg214887.html#msg214887

There is certainly the more conventional telescopic single piece nozzle extension concept, well demonstrated on ICBM's. Sea Dragon had a sorta pleated/folded metal nozzle extension that popped open like a jiffie-pop popcorn bag. The interesting bit in the above link is the inflatable airmat nozzle extension for the J-2X, filled via turbine exhaust. It's certainly unusual, using both turbine exhaust for maintaining inflation, plus possible film cooling via porosity of the internal airmat weave. I wonder if there are any opportunities for a TAN injector setup to line the main nozzle injector ring rather than the conventional injectors? Could the airmat concept be reversed for an annular aerospike?


For reference, what other major tricks are there to increase nozzle length? Physical extensions seem to revolve around some type of telescoping action. Non-physical methods creating virtual nozzles, such as a magnetic nozzle perhaps?

Offline john smith 19

  • Senior Member
  • *****
  • Posts: 10455
  • Everyplaceelse
  • Liked: 2499
  • Likes Given: 13796
Re: Nozzle tricks?
« Reply #1 on: 03/17/2014 11:42 am »
Interesting post over at the Secret Projects Forum, outlining early J-2X nozzle extension concepts.
For reference, what other major tricks are there to increase nozzle length? Physical extensions seem to revolve around some type of telescoping action. Non-physical methods creating virtual nozzles, such as a magnetic nozzle perhaps?
The linked item does a good job of showing a variety of extendible nozzle. They actual type used on the RL-10s (if you order one with it) seems to be a 2 piece design in RCC which has be to extended before ignition.

"Airmat" seems to have been proposed for various systems, including TPS and IIRC an inflatable wing aircraft.

There is another nozzle extension scheme I'm aware of. It originated with Bell Aerospace in the the early 70's. AIUI it worked like a kind of (refractory) metal foil "sock." A set of metal struts would sit round the engine and then extend downward. The tips of the struts had rollers the foil would gradually roll over them from the outside surface of the bell to the inside until fully extended. [EDIT Sort of like a Victorian "hoop skirt" turned inside out ]
« Last Edit: 03/17/2014 11:03 pm by john smith 19 »
MCT ITS BFR SS. The worlds first Methane fueled FFSC engined CFRP SS structure A380 sized aerospaceplane tail sitter capable of Earth & Mars atmospheric flight.First flight to Mars by end of 2022 2027?. T&C apply. Trust nothing. Run your own #s "Extraordinary claims require extraordinary proof" R. Simberg."Competitve" means cheaper ¬cheap SCramjet proposed 1956. First +ve thrust 2004. US R&D spend to date > $10Bn. #deployed designs. Zero.

Offline cordwainer

  • Full Member
  • ****
  • Posts: 563
  • Liked: 19
  • Likes Given: 7
Re: Nozzle tricks?
« Reply #2 on: 03/17/2014 07:24 pm »
I've always wondered if it might be technically feasible to use a variable geometry nozzle to control and throttle a pulse detonation ignition. In a pulse detonation jet engine the thermal wear and tear isn't as high as a rocket engine particularly if you use hydrogen or methane fuel so you might be able to use something like a ducted nozzle or a micro-actuated movable skirt. Could even be used in a small rocket engine in vacuum if you can get reliable pulse ignition with the right fuels.

Offline john smith 19

  • Senior Member
  • *****
  • Posts: 10455
  • Everyplaceelse
  • Liked: 2499
  • Likes Given: 13796
Re: Nozzle tricks?
« Reply #3 on: 03/17/2014 11:04 pm »
I've always wondered if it might be technically feasible to use a variable geometry nozzle to control and throttle a pulse detonation ignition. In a pulse detonation jet engine the thermal wear and tear isn't as high as a rocket engine particularly if you use hydrogen or methane fuel so you might be able to use something like a ducted nozzle or a micro-actuated movable skirt. Could even be used in a small rocket engine in vacuum if you can get reliable pulse ignition with the right fuels.
What properties of the nozzle do you want to change?
MCT ITS BFR SS. The worlds first Methane fueled FFSC engined CFRP SS structure A380 sized aerospaceplane tail sitter capable of Earth & Mars atmospheric flight.First flight to Mars by end of 2022 2027?. T&C apply. Trust nothing. Run your own #s "Extraordinary claims require extraordinary proof" R. Simberg."Competitve" means cheaper ¬cheap SCramjet proposed 1956. First +ve thrust 2004. US R&D spend to date > $10Bn. #deployed designs. Zero.

 

Advertisement NovaTech
Advertisement
Advertisement Margaritaville Beach Resort South Padre Island
Advertisement Brady Kenniston
Advertisement NextSpaceflight
Advertisement Nathan Barker Photography
1