NASASpaceFlight.com Forum

International Space Flight (ESA, Russia, China and others) => Japanese Launchers => Topic started by: rapaz on 12/08/2019 09:55 am

Title: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: rapaz on 12/08/2019 09:55 am
I'm making this blueprint. Suggestions? Thank you  :)
Title: Re: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: baldusi on 12/14/2019 02:26 pm
In the Engine Configuration you are pointing to the SRB-A nozzle. I would put dual lines (one to each engine) to stress out that it uses two. Or you can put "Dual LE-7A".
I would add the payload adapter to the right image of the stack. And add stage diameters.
Also, First Stage and Fairing vertical dimensions overlap with Second Stage's. You should cut FS at the stage adapter and same for fairing.
Title: Re: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: rapaz on 12/16/2019 07:13 pm
In the Engine Configuration you are pointing to the SRB-A nozzle. I would put dual lines (one to each engine) to stress out that it uses two. Or you can put "Dual LE-7A".
I would add the payload adapter to the right image of the stack. And add stage diameters.
Also, First Stage and Fairing vertical dimensions overlap with Second Stage's. You should cut FS at the stage adapter and same for fairing.
Thank you!!!
Great suggestions,
Second Version:
Title: Re: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: Stan Black on 12/16/2019 08:18 pm
I think the SRB need to be rotated by 45?
Title: Re: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: ace5 on 01/26/2020 10:17 pm
after you make the corrections and get a final version please publish a larger resolution version. I will give you credits on my FB page
Title: Re: (H2B) & HTV by JAXA & Mitsubishi Blueprint
Post by: rapaz on 07/02/2020 11:18 am
I think the SRB need to be rotated by 45?
Thank you, I've fixed it.