Author Topic: ISS Rack configurations  (Read 28423 times)

Offline russianhalo117

  • Senior Member
  • *****
  • Posts: 4016
  • AR USA / Berlin, DE / Moscow, RF
  • Liked: 815
  • Likes Given: 489
Re: ISS Rack configurations
« Reply #40 on: 09/18/2015 10:18 PM »
So I'm working on an updated rack topology diagram following the HTV-5 rack transfers.

Changes to the most recent topology diagram (posted below) are as follows:

. MSPR-2 to JPM1F2
. Galley rack to NOD1P4

The ZSR that was previously located at NOD1P4 I presume has now gone to the PMM, but I don't know to which bay. Also at least one RSP has been removed from the PMM for disposal via HTV, but again I don't know which bay it came from. As such I now have no idea as to the rack configuration of the PMM, so I may have to omit it from a future topology diagram.

Is anyone else aware of any other changes in rack topology since the last diagram that are not listed above?
I sent some emails might know by next week.

Offline Space Pete

Re: ISS Rack configurations
« Reply #41 on: 10/01/2015 02:12 AM »
Here's my updated rack topology diagram. Changes are as follows:

. MSPR-2 added to JPM1F2
. Galley rack added to NOD1P4
. PMM removed (since I have no info regarding it's current config)
NASASpaceflight ISS Editor

Offline Arb

  • Full Member
  • ***
  • Posts: 308
  • London
  • Liked: 175
  • Likes Given: 179
Re: ISS Rack configurations
« Reply #42 on: 10/04/2015 07:52 PM »
Very pretty Space Pete. And interesting. But sooo many TLAs.

Could look them up if there were more hours in a day but, given that you reissue this from time to time, would be much better if you could find a way to include a list of definitions. Perhaps move the colour key to the left to make a space? A smaller font would be fine. Also, an explanation of SDPO, OADF, etc.

Just my 2p worth.

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #43 on: 10/05/2015 08:38 AM »
Very pretty Space Pete. And interesting. But sooo many TLAs.

Could look them up if there were more hours in a day but, given that you reissue this from time to time, would be much better if you could find a way to include a list of definitions. Perhaps move the colour key to the left to make a space? A smaller font would be fine. Also, an explanation of SDPO, OADF, etc.

Just my 2p worth.

Added with reply #15 (page1) is a document called Rack SE, this explains the abreviations a bit. I will update that document.

I've added the document. A lot of information is from the txt. document Jonatan made a couple of years ago. So I should thank him for his work back than.
@SpacePete If you want to add the NSS logo and claim the autor rights it's fine by me. I couldn't have made this without NSS.
I've also added a small document that just explains the abreviations
« Last Edit: 10/05/2015 06:51 PM by Rik ISS-fan »

Offline Space Pete

Re: ISS Rack configurations
« Reply #44 on: 10/19/2015 02:45 PM »
Very pretty Space Pete. And interesting. But sooo many TLAs.

Could look them up if there were more hours in a day but, given that you reissue this from time to time, would be much better if you could find a way to include a list of definitions. Perhaps move the colour key to the left to make a space? A smaller font would be fine. Also, an explanation of SDPO, OADF, etc.

Just my 2p worth.

Hi Arb,

Thanks for your suggestions.

For sure I would like to include a key, maybe also with a picture of the rack in question and a description of its function. Maybe I'll look into doing a "v2" of this sometime. What I would really love to do is to make it interactive, so you could click on a rack and it would bring up the info. I would probably have to do that as an HTML page though.

Added with reply #15 (page1) is a document called Rack SE, this explains the abreviations a bit. I will update that document.

I've added the document. A lot of information is from the txt. document Jonatan made a couple of years ago. So I should thank him for his work back than.
@SpacePete If you want to add the NSS logo and claim the autor rights it's fine by me. I couldn't have made this without NSS.
I've also added a small document that just explains the abreviations

Thanks Rik, they are very useful.

Just for the record, with regard claiming author rights, I only put the NSF logo and my name on my topology diagram in order to stop other blogs from stealing it and presenting it as their own work (which has happened before). In reality all the work produced in this thread is only made possible by a collaboration of many people over many years, including yourself who put in the original work, for which I am grateful. :)
« Last Edit: 10/19/2015 02:47 PM by Space Pete »
NASASpaceflight ISS Editor

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #45 on: 02/05/2016 09:29 AM »
Several weeks ago I found the latest status update for ACLS (ESA Live support rack, Contribution for the 2016-2020 time frame, the Orion service module is the other contribution, the total value is 600mln euro [4x150mln]) It can be found here (direct download)

The plan has changed a bit. The ACLS rack will be launched on HTV-7 in 2017 (as planned) bit it's location has changed from Columbus to Destiny P1 (currently Robonaut is stowed there). The advantage of this is that there is a external vent and a water bus connection available there. So the ACLS rack can directly vent outside and no crew time is required to supply the water to and from the rack.

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #46 on: 02/05/2016 09:37 AM »
We also know there are five new racks planned:
- Two Basic Express racks (BER) ER-9B and ER-10B, most likely they will fly on HTV-6 or one on HTV-6 and one on HTV-8.
- A second globe box rack (MSG-2 or LSG {life science glovebox}) HTV-6 or HTV-8
- ACLS (Advanced Close Loop System) HTV-7 2017, goes to LAB P1.
- Water Stowage Rack, most likely HTV-7 2017, and I think it will go to the LAB, Node3 or PMM.

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #47 on: 10/30/2017 07:04 PM »
As announced I've made a Excel file with the ISS rack topology. But now I also want to include:
- the Class 2 facilities, aka, the payloads inside the EXPRESS rack's, EDR, MSPR's, MSG.
- External payloads.
- Launches: what goes up and comes down.

This is a first rough release. (It needs some improvements)
Feel free to suggest improvements. And feel free to modify the document and use it (or parts of it).
In my opinion this document couldn't have been created without the NSF community. So NSF has the author rights.

Edit: do more people prefer a .XLS instead of .XLSX file format. (Aka Excel 97-2003 instead of 201?)
I've checked nothing changes, so it's no problem to change to the previous format.
(the file gets a bit larger 2.57MB, I don't want to upload two versions so ether XLS or XLSX)
.XLS is beter compatable with other programs, right?
Sorry for the inconvenience. 
Interim solution a one page .xls & .pdf version.
« Last Edit: 10/30/2017 11:04 PM by Rik ISS-fan »

Offline Coastal Ron

  • Senior Member
  • *****
  • Posts: 3527
  • I live... along the coast
  • Liked: 2275
  • Likes Given: 2846
Re: ISS Rack configurations
« Reply #48 on: 10/30/2017 07:14 PM »
As announced I've made a Excel file with the ISS rack topology. But now I also want to include:
- the Class 2 facilities, aka, the payloads inside the EXPRESS rack's, EDR, MSPR's, MSG.
- External payloads.
- Launches: what goes up and comes down.

This is a first rough release. (It needs some improvements)
Feel free to suggest improvements. And feel free to modify the document and use it (or parts of it).
In my opinion this document couldn't have been created without the NSF community. So NSF has the author rights.

Wow, your spreadsheet is highly detailed, and even includes pictures - Great Job!
If we don't continuously lower the cost to access space, how are we ever going to afford to expand humanity out into space?

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #49 on: 10/30/2017 09:57 PM »
Some specific questions I have, to improve the document:
- Does someone know at which Locker position in Express Rack 6 the (malfunctioning) TangoLab2 was placed?
'PIM' locker = Programmable Isolation Mount; also known as: Controlled Dynamics Locker (CDL).
- What went up and down with SpX-11 & SpX-12 (I know a lot was Rodent Research that goes up and down).
  I know SABL-3 went up and -1 went down, because it had a error.

Errors now:
Ex-6 L8 CUCU-spare has been removed October 27th.
Location of TangoLab-2 in Express rack 6.
SAMS-II drawer was removed from EX-5 (I had missed it was placed into there, will most likely return to EX-2 or EX-7(Active vibration Isolated racks).

Large internal changes will come with HTV-8, I expect several (at lest two) ISPR racks. Each SpaceX mission goes along with a change externally. I think I've SpX-13 & -14 already covered, but the manifest could have changed.

A note: I think the class 3 payloads, aka, nanoracks experiments and other sub locker experiments; are to small and to numerous to follow. The purpose of the document is to make a more visual representation of the current experiment facilities on the ISS.
I did't make a decision jet if I would show the payloads on MUSES and MISSE-FF. (4 and 14).
I could use some help tracking all changes.
« Last Edit: 11/01/2017 11:37 AM by Rik ISS-fan »

Offline deruch

  • Full Member
  • ****
  • Posts: 1730
  • California
  • Liked: 1291
  • Likes Given: 1917
Re: ISS Rack configurations
« Reply #50 on: 11/04/2017 05:08 PM »
Cross-post from Expedition 53 thread:
Rack Swap in US Lab:  The crew swapped the Zero-G Stowage Rack (ZSR) in the LAB1O5 location with the Crew Health Care System (CheCS) Rack in the LAB1D4 location.  This swap was in preparation for a new Water Storage System (WSS) to be built into the ZSR later next year.  During the swap, the CheCS Rack needed to be temporarily moved to Node 1.  A Hatch Seal inspection was performed for the Node 1 Forward and the Lab Aft hatches following the transfer the activities. The Hatch Seal inspections are required to verify no damage following the transfer of the CHeCS rack through these hatches to perform the rack swap.
Shouldn't reality posts be in "Advanced concepts"?  --Nomadd

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #51 on: 11/04/2017 07:20 PM »
Thanks for the replies.
I already noted that CHeCS (RSR) and the ZSR (also CHeCS stowage) have been swaped. The WSS (Space Shuttle water tanks) will be installed inside the ZSR that is now at LAB D4.
The first image added to this post is the rack configuration at this moment, I've added all stowage locations.
(I forgot to colour PMA 2 & 3. And the Deck berthing ports in Node 1 & Node 2 are also used for stowage when there is no commercial resupply vehicle)
I've also indicated the two Work tables placed in front of the port and starboard DDCU's in Node 2, with a *.

I found confirmation that ACLS and LSG will launch on HTV-7. Possibly also a BER (Basic Express Rack) launches on HTV-7. ACLS goes to LAB P1. I don't know where LSG and the BER's are going.
In the second image only the rack locations that are aren't used as supposed are colored.
R2, HDP and ZSR's have to move for the new facilities. But I couldn't find what NASA is planning.

I expect that LSG will be located besides a EXPRESS Rack. All facilities in EX-4 could also go into a BER, so I think JPM F6 is the most likely location for LSG. But I could be totally wrong.

Question: must I add the synonym names of the modules: Unity, Harmony, Tranquility; KIBO.
« Last Edit: 11/04/2017 07:29 PM by Rik ISS-fan »

Offline deruch

  • Full Member
  • ****
  • Posts: 1730
  • California
  • Liked: 1291
  • Likes Given: 1917
Re: ISS Rack configurations
« Reply #52 on: 12/13/2017 01:24 AM »
Picture of Kibo rack usage from the JAXA press kit for Kanai's mission to ISS (Expedition 54/55; launch on MS-07).  Not sure on how "up-to-date" this is though, as I don't speak Japanese.

http://forum.nasaspaceflight.com/index.php?topic=40619.msg1757515#msg1757515
« Last Edit: 12/13/2017 01:26 AM by deruch »
Shouldn't reality posts be in "Advanced concepts"?  --Nomadd

Offline Rik ISS-fan

  • Full Member
  • ****
  • Posts: 764
  • the Netherlands
  • Liked: 160
  • Likes Given: 65
Re: ISS Rack configurations
« Reply #53 on: 12/15/2017 11:23 AM »
Interesting Nasa blog about LSG and the new refrigorator-Freezer rack.
LSG (Live Science Glovebox) will be build into a ZSR (Zero-gravity Stowage Rack), in Kibo.
WSS (Water Stowage System) will be build into the ZSR that was moved to LAB D4.
LSG, WSS and ACLS will launch on HTV-7. Most likely also the Refrigirator-Freezer rack (?MELFI or other?) will launch on HTV-7.

I got a PM that a new ISS FPIP document was posted on L2, unfortunatly I don't have acces (jet). Please if allowed share the info in the ISS FPIP document.
I guess the malfunctioning MELFI could be deorbited with HTV-7, and possibly several RSP's (Resupply Stowage Platforms.)
Please, if you have info on the Refrigirator-Freezer Rack, share it. I could only find a document from 2002, Crew Refrigerator Freezer Rack, Astrium. [pdf link] I think they are MELFI's.
But I've also read about a Rapid Freezer for the ISS.

I think the LSG (Live Science Glovebox will be placed into the ZSR117 at KIBO/JPM F6 or ZSR31 at JPM A5.
Or JPM D3 the HDP405 and replacement of MELFI-1. (Looking at deruch's post)

In BEAM M1 and M3 bags have been mounted to the guidance post to create stowage space. I still have to add that in the excel. I'll post a update when I got more info. (topology after HTV-7)
« Last Edit: 12/15/2017 11:30 AM by Rik ISS-fan »

Tags: