Author Topic: Ian's Paper Model Rocket Collection  (Read 7733 times)

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Ian's Paper Model Rocket Collection
« on: 02/22/2017 01:36 AM »
NOTE: This page is a wall of pictures with some text mixed in.

Hi everyone!

In the past year I began creating paper (mostly cardstock, actually) models of active, retired and future rockets. I decided I'd like to share some pictures of them, and eventually document creation of new models.

I know most people will ask, so I got these models from http://axmpaperspacescalemodels.com/ and http://papermodelingman.com/gallery_models.html. Both are great websites and feature/produce very high quality models. I would not be surprised to see some of these models (Not the ones built be me, they're MINE *Hiss*) in museums.

Final note: All models are in 1:144 scale, except the Falcon 9s (1:100 scale), the separate capsules in front of them (I'll mention the scale under their pictures), and the Lego Shuttle (No clue about its scale)

Poyekhali! (Russian for: let's go!)


First: A complete view of (most of) the models on my model-shelf.



Left to Right:
Steel model of the Martian rovers Opportunity/Spirit
1:100 scale Apollo CSM
The giant SLS Block I,
1:96 scale Orion capsule
Ares 1-X
Falcon 9 1.1 (1:100 scale) expendable
Crew Dragon
F9 Full Thrust recoverable
Antares 230 series
Steel Space Shuttle Atlantis replica
Atlas V 401 and 501
Lego Space Shuttle (With a random Apollo 13 patch for good luck)


Next, a landed F9 first stage model (On my workbench, no room on the shelf anymore!)









This is by far my favorite model, and so far the one that came out the best. I actually tried attaching my drone to the top and attempting to fly it. I never considered the center of mass/thrust relationship, and it ended up falling over and breaking on all 4 tests. Easy repairs, though. Project scrapped.


Up next, the steel models, Shuttle Atlantis, and the rover Opportunity/Spirit (I refer to it as Spirit, homage to the now-dead rover.)









I purchased these as kits from Barnes & Noble's games section. They come as sheets of steel with laser-cut designs printed in them, you pop them out, fold them as needed, and bend locking tabs into place (No welding or gluing, only pliers needed)


Up next (I'll be using that phrase a lot), the 1:100 Apollo CSM







This (and the other capsules) was made as part of a two-day-per-capsule project to kill some down time over the summer. I now just need a LM alongside it (hint hint, possible future project)


Next, the giant SLS Block I (1:144 scale) and the Orion (1:96 scale)











The SLS was very fun to make, and took a LONG time to build (The reason I built it, to kill weeks of time over the summer). If you look at the photos showing the encapsulated Orion+LES at the top of the rocket, you'll notice it's pretty beat up. I'll just say it needs a proper stand to not fall off a 6-foot-tall shelf after every gust of wind.


Next, the Ares 1-X.











This model was also fun to make, and is one of my favorites. The LES is similar to what the SLS' looked like just after completion.


Next, the Antares 230.





This model is one of the few that are made of plain paper, not the thicker cardstock used on most others. I now realize that was a pretty poor choice, as it's wrinkled everywhere. I made this to kill a 3-day weekend (Man, I love killing days off). It shares a (cardboard) stand with the recoverable Falcon 9. I'm trying to figure out how to make a more minimalist stand, using clear plastic, wires, etc.


Up next, the Falcons and Crew Dragon















The expendable Falcon 9 1.1 was the second model I made, the first cardstock model. I was relatively inexperienced in modeling, so I didn't add in the legs or grid fins, and added an Orbcomm fairing because the second Orbcomm mission was the first Falcon launch I ever watched (And boy, was it great). I made the second Falcon because I had improved my modeling skills and wanted a modern version of the Falcon- with landing legs. I also made this version have interchangeable payloads after taking these photos (2 months ago). The Crew Dragon was part of the previously mentioned time-killing Capsule-making marathon this summer.


(Almost done) The Atlases (Atlas V 401 & 501)









The 501 was my first ever model rocket. I never changed any part of it, apart from cutting the fairing off to allow for interchangeable fairings (The MUOS 4 fairing (tallest fairing) was the original fairing). The original 401 (4th or 5th rocket I made) turned out HORRIBLE, so I almost completely remade it (saving the engine section), and it turned out very clean (in my opinion ;) )


Finally, the (1:144) Saturn V. This was the hardest model I made so far, and took, like the SLS, very long (MONTHS (mostly waiting for glue to dry, and taking one- or two-day breaks))



















Man, where do I start. First off, this thing is so tall it can't fit on my model shelf without the ceiling getting in the way, so I put it on a lower shelf. I made the stages separate-able (word?) so I can use it for demonstrating how rockets stage, and what each Saturn V stage looked like. The first stage looks awful on the backside, I might redo it later. The second and especially third stages came out pretty well, so I'm overall happy with the model.



And that's it (for now). Thanks for reading/looking!

I'll be documenting my future builds in the comments. I'm not entirely sure what I'll make next, perhaps an Ariane 5 or Delta II? Maybe another fairing for the F9 or Atlas V...
« Last Edit: 02/22/2017 01:37 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline Ronpur50

  • Full Member
  • ****
  • Posts: 1884
  • Brandon, FL
  • Liked: 703
  • Likes Given: 1444
Re: Ian's Paper Model Rocket Collection
« Reply #1 on: 02/22/2017 11:20 PM »
Really awesome, Ian!  I really admire you paper modelers.  I can never get them to look right.  I am so stuck with plastic!

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #2 on: 02/24/2017 12:14 AM »
Really awesome, Ian!  I really admire you paper modelers.  I can never get them to look right.  I am so stuck with plastic!

Thanks!

This will sound very lame, but don't give up. For more than half these models I had portions that came out horribly or ripped. Reprinting and retrying fixed the problem. I actually mostly redid the Atlas V 401 because it looked awful, and it was my fourth or fifth model!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #3 on: 03/05/2017 03:10 PM »
Tory Bruno loves the models  ;D ;D ;D

https://twitter.com/torybruno/status/838421092641406978

"@IanPineapple Wow. Those are amazing"
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #4 on: 03/10/2017 06:12 PM »
Oh boy what's this...
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #5 on: 03/12/2017 01:41 AM »
My Next project: making a second stage engine for my Falcon 9 model. No plans, printing NOTHING. Making this entirely by hand with only pictures to guide me. Oh dear.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #6 on: 03/12/2017 03:50 AM »
Alright, engine made (from SCRATCH), bottom dome of S2 done, go for final assembly.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #7 on: 03/17/2017 02:30 AM »
I finished the second stage, and it doesn't look too bad to me!

I'm also upgrading my expendable Falcon 9 1.1 to have interchangable fairings, and will get an Echostar fairing soon. My desk is now looking like the Hawethorne factory with all these stages sitting there!

I have a 3-day weekend ahead of me, and I'm thinking of making a Gemini-Titan II or other historic vehicle.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline GWH

Re: Ian's Paper Model Rocket Collection
« Reply #8 on: 03/17/2017 02:45 AM »
Nice work!  Any plans for flying models?

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #9 on: 03/17/2017 02:50 AM »
Thanks! The thought occasionally crosses my mind, but I won't fly any of these, they take too long to make to have to rebuild after each flight. I will get into model rocketry eventually, using PVC pipes and cardboard, nothing fancy and delicate.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #10 on: 03/17/2017 05:30 PM »
I'm making a Titan II/GLV next, but first, a Mercury Atlas!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #11 on: 03/20/2017 11:35 PM »
The Atlas is coming along well (Almost done), I'll post pics of it finished soon.
I'll be taking a break after the Atlas, so don't expect the Titan II/GLV until April or May.

If you want to try making these models yourselves, here are some good sites I've used:
http://axmpaperspacescalemodels.com/ Very high quality, well put-together instructions (I got the Atlas Vs, Antares, the capsules, the Falcons, SLS and Ares 1X from here)
http://www.ariespapermodels.nl/ Haven't used this site yet, but it looks good
http://www.nielspapermodels.com/links.htm Here's where I got the Mercury-Atlas from, and there are a lot of other old rockets.
http://papermodelingman.com/gallery_models.html I got the Saturn V from here and plan to get the Titan II from here as well. It seems as though the site hasn't been updated in a while, but there are still a lot of good models here.
« Last Edit: 03/20/2017 11:35 PM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Online ChrisC

  • Veteran
  • Full Member
  • ****
  • Posts: 1405
  • Liked: 243
  • Likes Given: 234
Re: Ian's Paper Model Rocket Collection
« Reply #12 on: 03/21/2017 02:33 AM »
Up next, the steel models, Shuttle Atlantis, and the rover Opportunity/Spirit (I refer to it as Spirit, homage to the now-dead rover.) ... I purchased these as kits from Barnes & Noble's games section. They come as sheets of steel with laser-cut designs printed in them, you pop them out, fold them as needed, and bend locking tabs into place (No welding or gluing, only pliers needed)

I've got one of those MER rovers on my shelf!  My god, what a pain.  It took me like a week to complete.  Here's the kit.



« Last Edit: 03/21/2017 02:36 AM by ChrisC »
NASA TV in HD:  history, FAQ and latest status

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #13 on: 03/23/2017 09:57 PM »
Up next, the steel models, Shuttle Atlantis, and the rover Opportunity/Spirit (I refer to it as Spirit, homage to the now-dead rover.) ... I purchased these as kits from Barnes & Noble's games section. They come as sheets of steel with laser-cut designs printed in them, you pop them out, fold them as needed, and bend locking tabs into place (No welding or gluing, only pliers needed)

I've got one of those MER rovers on my shelf!  My god, what a pain.  It took me like a week to complete.  Here's the kit.



That model took me about 2-3 hours to build, no joke.

I mgiht havea bit ofa gift in spacecraft modelling.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #14 on: 03/26/2017 03:37 AM »
I'll get Atlas pics up sometime soon when I remember, but now I'm thinking about making a Delta III....

P.S. Feel free to post YOUR models on here, I LOVE to see what others make!
« Last Edit: 03/26/2017 03:37 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #15 on: 03/26/2017 08:33 PM »
I have pictures of the Atlas to share, along with the now-finished Sojourner rover and the current configuration of the Rocket-Shelf. (NOTE: The Atlas is not to scale with ANY of the models. If it were to scale it would be about as tall as the first stage of itself.

I printed out a Titan-II, and will be working on that slowly throughout the coming week.

For some reason these pictures like appearing upside-down. I truly apologize for that.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline GWH

Re: Ian's Paper Model Rocket Collection
« Reply #16 on: 03/29/2017 02:28 PM »
P.S. Feel free to post YOUR models on here, I LOVE to see what others make!

OK.  Using AXM PaperSpace's models all scaled up/down to 1:88 I built a flying Falcon 9 with deployable legs and a Dragon 2 to fly on top or on its own as the "pad-abort" model.

F9 legs were made with carbon fiber struts wrapped in cardstock from the AXM prints.  The Dragon 2 is double walled cardstock with a balsa wood nose that was turned on a drill press "lathe", the heatshield was built of plywood and can be removed with the intent of nestling a camera in there.

F9 reached 215m on an Estes E-9 and leg deployment works at apogee but still have some tricks to try in regards to stability on descent with the chutes.


Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #17 on: 04/02/2017 12:54 AM »
That's a really cool model! I'm waiting until AXM releases the flight-config Dragon 2 for my Falcons.

I really want to fly one now...
« Last Edit: 04/02/2017 02:44 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #18 on: 04/02/2017 12:59 AM »
The Titan II is slowly coming along, the Gemini capsule is almost complete. The fuselages are done (the glue is currently drying actually), and the engines are done. I need to finish the engine mounting points and then I'll be ready for final assembly. It will probably be done by the end of this week
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #19 on: 04/04/2017 01:40 AM »
I'm now throwing around the idea of starting a multi-week project, making a paper Shuttle, and retiring my LEGO model.

The only question is: Which orbiter?

I'm thinking Discovery (my favorite  ;D)
« Last Edit: 04/04/2017 01:41 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline Lar

  • Fan boy at large
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 8156
  • Saw Gemini live on TV
  • A large LEGO storage facility ... in Michigan
  • Liked: 4904
  • Likes Given: 3329
Re: Ian's Paper Model Rocket Collection
« Reply #20 on: 04/04/2017 01:56 AM »
Just as a note, LEGO models tend not to be to any particular scale. We just build so it looks good in context.

Nice set of models there Ian...
"I think it would be great to be born on Earth and to die on Mars. Just hopefully not at the point of impact." -Elon Musk
"We're a little bit like the dog who caught the bus" - Musk after CRS-8 S1 successfully landed on ASDS OCISLY

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #21 on: 04/06/2017 03:55 AM »
Thanks! Yeah, I'd say the shuttle is near 1:100 scale. Having an accurate scaled model will look much better.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #22 on: 04/22/2017 02:55 AM »
Hey, I finally finished the Titan II! It's kinda late because of schoolwork and some mistakes made. The worst part was probably the lower engine section, because that needed a lot of small parts, and therefore took a long time.

Each stage is detachable, including the Gemini spacecraft itself. The stand isn't too good at holding it up, I'll probably reinforce it with wire or just make another temporary cardboard stand.

Also, I just printed out the pages for my next model... The STS-133 Discovery mission! This will take a WHILE to build.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline FishInferno

  • Member
  • Posts: 90
  • Liked: 38
  • Likes Given: 71
Re: Ian's Paper Model Rocket Collection
« Reply #23 on: 04/23/2017 04:48 PM »
Awesome models bro! I have made a couple space models (and a few Minecraft paper models from the dark ages :P).  I made the Falcon 9 1.0 and had it sitting on the shelf for a while, before deciding to convert it into a flying model rocket.  I'm very happy with the way it turned out and it flew beautifully :)

https://www.youtube.com/watch?v=qXvinHs5KK8&feature=youtu.be







Comparing SpaceX and SLS is like comparing paying people to plant fruit trees with merely digging holes and filling them.  - Robotbeat

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #24 on: 04/23/2017 05:03 PM »
That looks awesome, and it seemed to fly very well!! I too would like to convert a model to a flying one, and I think the Ares-1X is the best candidate. Perhaps in a few months I'll make a second one (with some structural enhancements) and try flying it on a custom motor.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #25 on: 04/26/2017 03:28 AM »
Here's a quick update, I started the Shuttle on Saturday, and here's the progress so far. This is pretty mich my ideal weeknight, rocking out to Billy Joel and building a Space Shuttle. Not many people can relate!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #26 on: 04/28/2017 02:13 AM »
The Shuttle is ALMOST done! I just need to integrate the engines and the tail fin. I'm assuming a Sunday or Monday completion...?
« Last Edit: 04/28/2017 02:14 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline Ronpur50

  • Full Member
  • ****
  • Posts: 1884
  • Brandon, FL
  • Liked: 703
  • Likes Given: 1444
Re: Ian's Paper Model Rocket Collection
« Reply #27 on: 04/29/2017 02:03 AM »
Billy Joel and a space shuttle model?  I could do that.  Maybe a little Rush thrown in for me!

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #28 on: 05/02/2017 02:39 AM »
Billy Joel and a space shuttle model?  I could do that.  Maybe a little Rush thrown in for me!

Ha, but ONLY "Countdown" can be played!  ;)



The Shuttle is almost done, the only thing I need to do is integrate the engines, then it's on to the ET and SRBs!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #29 on: 05/07/2017 07:02 PM »
The Orbiter is complete, work has started on the boosters, with the right one almost completed.

The boosters will probably be done by the end of this week, and the whole stack near the end of May.

See you then!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #30 on: 05/14/2017 04:24 PM »
ET and SRBs are mostly complete, they're just missing their attachment points. It SHOULD be finished by tonight or tomorrow.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #31 on: 05/18/2017 02:42 AM »
The model has finished gluing, I'll let it dry overnight and take pictures tomorrow. I don't want it to fall apart while taking pictures ;)
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #32 on: 05/23/2017 01:40 AM »
The Shuttle is finished! It was done about 5 days ago but schoolwork, other hobbies, and forgetfulness got in the way.

This model took a while, but not as much as the Saturn V did.

You can see in the last pic my other 1:144 scale models, and the old LEGO shuttle for scale. I modified the LEGO Shuttle's stand for the new scale shuttle, and it's pretty good.

I love seeing how much larger the Saturn is compared to the Shuttle.

I printed out my next model the Delta II. I'd guess late June as a completion date. After that will likely be the Delta III unless AXM posts something new and awesome
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #33 on: 05/23/2017 01:42 AM »
For some reason most photos appear upside down. I don't know why, and I don't know how to fix it. Sorry!
« Last Edit: 05/23/2017 01:43 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #34 on: 06/03/2017 03:00 AM »
The Delta II is coming along, though pretty slowly. The first stage is mostly done, and I've begun work on the boosters (beginning work meaning I have one nose cone finished...)

And I think it's gonna be a long long time...
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #35 on: 06/25/2017 03:25 AM »
Wow, I REALLY haven't updated this post in a while. Finals prep (our school is getting out LATE this year), playing Portal and Portal 2 (Just got Portal 1, replaying Portal 2, great games.) and a liberal amount of Kerbal mixed in distracted me from modelling, but I've been doing a bit.

Well, I don't have a camera handy, so I'll just give a text update.

The Delta II first stage is mostly finished, just needs the vernier engines and the preburner exhaust pipe to be attached. Booster 9 is mostly done (It's the 'test booster', where I figure out how on earth to build the boosters), and 7 & 8 aren't too far behind. 4, 5 and 6 are cut out, the last 3 aren't cut out, and all the booster nose cones and nozzles are cut out.

Wow, that was a VERY specific description of what I've done...

Anyway, I'll be working on it more in the coming week and after that (the start of summer vacation). Then I'll seriously take that modelling break I've been saying I'll take since the beginning of this year :P
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #36 on: 06/25/2017 03:26 AM »
Wow, I REALLY haven't updated this post in a while. Finals prep (our school is getting out LATE this year), playing Portal and Portal 2 (Just got Portal 1, replaying Portal 2, great games.) and a liberal amount of Kerbal mixed in distracted me from modelling, but I've been doing a bit.

Well, I don't have a camera handy, so I'll just give a text update.

The Delta II first stage is mostly finished, just needs the vernier engines and the preburner exhaust pipe to be attached. Booster 9 is mostly done (It's the 'test booster', where I figure out how on earth to build the boosters), and 7 & 8 aren't too far behind. 4, 5 and 6 are cut out, the last 3 aren't cut out, and all the booster nose cones and nozzles are cut out.

Wow, that was a VERY specific description of what I've done...

Anyway, I'll be working on it more in the coming week and after that (the start of summer vacation). Then I'll seriously take that modelling break I've been saying I'll take since the beginning of this year :P

Anyway, thanks for reading and (maybe) staying patient with me! Perhaps I'll get some pics up soon

-Ian
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #37 on: 06/28/2017 01:49 AM »
So my dog decided to eat booster #9, and the onyl part that survived was the nosecone...

That's why I'm a cat person.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #38 on: 07/01/2017 03:35 AM »
So here are some pictures from today of progress. The core stage is mostly done, and I've been focusing on the boosters. You can see they're all in various states of progress, and booster #7 is finished. It is SO tedious to make 9 small nosecones, 9 small nozzles, and 9 small paper tubes...

Anyway, I can easily see all boosters being done by the end of next week, and the whole thing will probably be done in 1.5-2 weeks.

Thanks for checking this out!
-Ian
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #39 on: 07/18/2017 01:00 AM »
The boosters are done, along with the core rocket. (Only about a week late... I work on Elon time.) the mounting pieces for the SRBs are the weird spikes sticking out, they're currently drying in place. In about an hour I'll begin mounting the SRBs. I might be done tomorrow, I don't know.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #40 on: 07/19/2017 04:15 AM »
Booster mount has begun, it's reslly taking shape! Currently 4 are in place, 5 are not. It will probably be done tomorrow.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #41 on: 07/24/2017 07:48 PM »
The Delta II is done! I think my printer messed up the scaling because it seems a bit too tall.

Anyway, I attached a few images, along with a booster attachment picture, and one of my new model rocket shelf, containing the Mercury-Atlas, Gemini- Titan, Saturn V, and Apollo CSM. I had the Saturn over there by itself originally, then moved over the Atlas and Titan to clear up room on the main shelf. I put the landed Falcon 9 in their place until I build future models.

Speaking of future models, I see a Delta III and IV coming soon, once I get more cardstock. I already used up 100 sheets!
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #42 on: 07/24/2017 09:34 PM »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #43 on: 08/26/2017 04:11 AM »
Here's a little glimpse into my models folder, which houses the .pdf files of some of my more recent models, along with a few possible future builds.

The Saturn C8 is only a dream (for now... ;) )

Mercury-Redstone is likely next, probably starting in the next week.
« Last Edit: 08/26/2017 04:13 AM by IanThePineapple »
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Offline IanThePineapple

  • Full Member
  • ***
  • Posts: 383
  • NaN
  • Liked: 93
  • Likes Given: 53
Re: Ian's Paper Model Rocket Collection
« Reply #44 on: 08/29/2017 04:58 AM »
So I've started the Redstone model, and it's coming along well. It's taken a lot less time than I thought to get this far.
Proud creator of Ian's Paper Model Rocket Collection:
https://forum.nasaspaceflight.com/index.php?topic=42383.0

Tags: