Author Topic: Boeing to use Orbiter Processing Facility-1 for X-37B OTV  (Read 13094 times)

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 30340
  • Cape Canaveral Spaceport
  • Liked: 8596
  • Likes Given: 276
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #20 on: 03/30/2016 07:27 PM »
Drove by the OPF-2 and the main door was open.  It was completely gutted and empty.

Offline edkyle99

  • Expert
  • Senior Member
  • *****
  • Posts: 12155
    • Space Launch Report
  • Liked: 2870
  • Likes Given: 498
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #21 on: 03/30/2016 07:46 PM »
Re:  the new, vertically-oriented door.  Could this be for payloads coming into the building for integration with X-37B, rather than for an X-37B leaving the building?

 - Ed Kyle

Offline virnin

  • Member
  • Posts: 84
  • Kansas
  • Liked: 21
  • Likes Given: 22
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #22 on: 03/30/2016 08:02 PM »

Maybe there is an airlock installed on the other side.  Opening the front door, opens the whole facility to the outside.

That would assume the inside of the OPF would now be a clean room, right?

Not necessarily just to support a clean room, could be intended to protect the contents of the building from casual surveillance when the outer door is open, especially if there are two vehicles in the launch rotation.

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 30340
  • Cape Canaveral Spaceport
  • Liked: 8596
  • Likes Given: 276
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #23 on: 03/31/2016 12:04 AM »
Re:  the new, vertically-oriented door.  Could this be for payloads coming into the building for integration with X-37B, rather than for an X-37B leaving the building?


It is sized for an Atlas 5m fairing.  The X-37 payloads could fit through a double door.  But that doesn't mean the same door could be used for both directions.

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 30340
  • Cape Canaveral Spaceport
  • Liked: 8596
  • Likes Given: 276
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #24 on: 03/31/2016 12:05 AM »

Not necessarily just to support a clean room, could be intended to protect the contents of the building from casual surveillance when the outer door is open, especially if there are two vehicles in the launch rotation.

There are easy work arounds for that, which don't need an airlock.
« Last Edit: 03/31/2016 12:05 AM by Jim »

Offline Ronsmytheiii

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 22207
  • Liked: 423
  • Likes Given: 215
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #25 on: 03/31/2016 01:42 AM »
Drove by the OPF-2 and the main door was open.  It was completely gutted and empty.

This looks like the latest image I could find.

http://www.collectspace.com/ubb/Forum35/HTML/000623.html

Offline jacqmans

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 16174
  • Houten, The Netherlands
  • Liked: 2218
  • Likes Given: 129
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #26 on: 04/04/2016 09:46 AM »
Drove by the OPF-2 and the main door was open.  It was completely gutted and empty.

This looks like the latest image I could find.

http://www.collectspace.com/ubb/Forum35/HTML/000623.html

That's OPF-2, The X-37 OPF is OPF-1 and OPF-3 is now CST-100

Offline Ronsmytheiii

  • Moderator
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 22207
  • Liked: 423
  • Likes Given: 215
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #27 on: 04/04/2016 08:15 PM »
Drove by the OPF-2 and the main door was open.  It was completely gutted and empty.

This looks like the latest image I could find.

http://www.collectspace.com/ubb/Forum35/HTML/000623.html

That's OPF-2, The X-37 OPF is OPF-1 and OPF-3 is now CST-100


Yes, I was responding to Jim's comment about OPF-2

Edit: Also This article states that OPF-2 was taken by the X-37 program as well:

Quote
The X-37B program, which currently consists of two nearly 9-meter-long robotic spaceplanes, is taking over Orbiter Processing Facility (OPF) bays 1 and 2.

http://spacenews.com/42367military-space-quarterly-nasa-prepares-to-host-hush-hush-military/
« Last Edit: 04/04/2016 08:20 PM by Ronsmytheiii »

Offline Jim

  • Night Gator
  • Senior Member
  • *****
  • Posts: 30340
  • Cape Canaveral Spaceport
  • Liked: 8596
  • Likes Given: 276
Re: Boeing to use Orbiter Processing Facility-1 for X-37B OTV
« Reply #28 on: 10/01/2016 12:55 AM »
New door opening on OPF-2

Tags: